Mechanical bistable (CB9228E)

Found in an Elektor from the 90s, this TTL circuit can be used as a shield without any bouncing problems. The circuit must be powered with 5 V.

| Clique na imagem para ampliar |

Active Cut-Out Amplifier (CB15422E)
The amplifier shown in the figure was obtained from the Anlog Devices linear integrated circuits...
Silk Screen Printing Timer (CB4652E)
If the reader still uses silk screen printing tables this is an interesting circuit found in a 1994...
Stereo balance test (CB9106E)
This circuit monitors the output of a stereo amplifier, checking the balance and balance between...